■FORCE USA C20 All-in-One Trainer [Made to Order]
商品コード： 6020400206000
[Display store]
※Bench, barbell, and plates are sold separately.
FORCE USA C20 All-in-One Trainer
The ultimate all-in-one rack
The C20 is Force USA's best all-in-one rack ever, boasting overwhelming rigidity with 3x3 inch uprights and an 11-gauge (approx. 3.06mm thick steel) frame.
It enables free weight, Smith machine, cable, chin-up/dip, and landmine full-body training at a very high level.
With no compromises on detail, it thoroughly pursues ease of use. A wide variety of attachments expands your training options. Furthermore, the C20 also prioritizes storage functionality. With 47 pegboard holes and storage plates, it offers excellent storage capacity.
By combining it with the optional sliding bench, you can expand your training variations to include leg press, hack squat, leg extension/curl, and preacher curl. While space-saving, it completes the ultimate training station with no blind spots.
■ Overwhelming Rigidity
It boasts overwhelming rigidity with a 3x3 inch, 11-gauge frame. It supports all levels of training, from beginners to advanced users.
The weight capacities are approximately 453 kg for the rack itself, 350 kg for the Smith machine, and 350 kg for the chin-up bar. The cables are 6.2mm nylon-coated mil-spec aircraft quality cables, tested at 907 kg (2000 lbs) for assured strength.
The safety bar for the half rack is approximately 51cm long, providing excellent stability and security. The attachment mechanism has also been revamped for even greater ease of use.
■ Freely Adjustable Cable System
The cable columns mounted on the left and right uprights allow for adjustment of the column height itself, as well as vertical and horizontal angle adjustments.
(Vertical angle: 4 levels, Horizontal angle: 5 levels)
The horizontal angle adjustment allows for a very wide range of starting positions, enabling stretched cable crossovers and more. The vertical angle adjustment allows for more precise adjustment of the starting position.
Furthermore, the C20 uses high-quality aluminum pulleys, realizing extremely smooth cable movement.
■ High-Quality Smith Machine
The beautiful matte black Smith machine features a high-quality bearing system that provides extremely smooth movement. With a sufficient load capacity of approximately 350kg, the Smith machine can handle even ultra-heavy training without issue. A safety bar is also included to ensure safety.
It also features IPF/IWF compliant markings, with meticulous attention to detail such as exquisite knurling and beautiful coating.
■ Unique Chin-up & Dip System
The chin-up and dip system is very unique.
The chin-up bar is a multi-grip bar that allows for various grips, including wide, narrow, parallel, overhand, and underhand. The chin-up bar part is removable, allowing you to adjust its position left or right to suit your physique and preference.
For dips, set the safety bars inward and attach the dip bars to the holes. The grip width can also be adjusted freely, making it suitable for trainees of all body types.
Furthermore, an assist strap that can be used for chin-ups and dips is standard equipment. By connecting it to the cable column and leaning your body weight into the strap, you can perform assisted chin-ups and assisted dips. This can be used by beginners and for intense training.
■ Expand your training variations with the landmine attachment
A landmine attachment for inserting barbells is included as standard.
In addition to classic landmine exercises like T-bar rowing (back), you can also perform rotational exercises that are difficult with other equipment, such as core twists (abs).
With a little ingenuity, you can significantly expand your range of training exercises.
■ Further expand your variations with the sliding bench.
By combining with the optional FORCE USA Sliding Bench, you can perform:
・Leg press
・Hack squat
・Leg extension/curl
・Preacher curl
This allows you to dramatically expand your training variations even in a limited space.
※The video shows a combination with the Force USA C10 All-in-One Rack, but the usage method is the same.
■ Standard 90kg (approx.) weight stack on each side
Expandable to approx. 136kg per side with optional upgrade
The back of the rack is equipped with a weight stack of approximately 90kg (≒200 pounds) on each side.
The C20 features an innovative weight stack system with standard 2kg add-on plates (fine-tuning weights). Add-on plates are located on top of the weight stack, allowing for fine adjustment of the weight stack's weight as needed.
Band pegs are also provided, so you can set bands on the weight stack to adjust the load according to your training range.
Furthermore, the weight stack can be expanded to approximately 136kg per side by adding an optional upgrade. This allows for sufficiently challenging cable training with a 1:1 or 1:2 effective cable load.
■ Excellent Storage Functionality
Traditional all-in-one racks, despite their versatility, had the drawback of making it difficult to store attachments.
The C20 overcomes this drawback. It features a pegboard with 47 holes, storage plates, and even allows attachments to be stored on the back of the machine. Its excellent storage functionality provides user-friendly and aesthetically pleasing storage capacity.
Q&A
Approximately 280cm wide x 350cm deep x 250cm high should be sufficient.
However, these figures are just a guideline. This space is based on considering bench presses and hack squats using the optional sliding bench. If you do not perform these exercises, you can install it in a smaller space.
If you have any concerns, please feel free to contact us.
This is the most common question we receive regarding home gyms. There's generally no need to worry about this. Current building codes specify a minimum long-term live load of 180kg/㎡. This is a standard value used for calculating the entire room. For example, if a 6-tatami mat room is 9.72㎡, the total long-term live load for that room would be at least 9.72㎡ x 180kg = approximately 1750kg. Therefore, even if the total weight of the machine exceeds 500kg, the room as a whole can sufficiently withstand the weight, so there's generally no concern about the floor collapsing due to the machine's weight. However, if the load is concentrated in an area far from a support pillar, or in cases of building deterioration or faulty construction, there might be exceptions. If you remain concerned, it's best to consult a professional.
It's difficult to give a definitive answer as it depends on the person assembling it, but it falls into the more challenging category among training equipment.
However, we offer delivery and assembly/installation services for an additional fee, so there's no need to worry. Please feel free to consult us. We will provide estimates as many times as you need, free of charge.
Regardless of whether it's a detached house or an apartment building, a normal width corridor (around 80cm) is sufficient.
In reality, the product is packaged in small, disassembled parts and can be carried in piece by piece, so there's no need to worry. Even the largest parts are long, thin frames like uprights, measuring about 200cm, so it's highly unlikely that delivery will be impossible unless there are very special circumstances.
At actual delivery sites, it's common to uncrate the product in front of the building or on the truck bed and carry in the parts individually.
If you have any concerns, please feel free to contact us.
As an example, many people typically spend around 1,000,000 to 1,200,000 yen for a setup including the [C20 All-in-One Rack + Bench + Plates + Bar + Flooring]. However, this is just an example and the cost can vary greatly depending on what you choose.
We will provide free estimates as many times as you need, so please feel free to inquire even during the planning stage.
■ Accessories
- Aluminum pulley
- Dip handles x2
- Short straight bar
- Short curl bar
- Lat pulldown bar
- Handle straps x2
- J-hooks x2
- Safety bars x2
- Landmine
- Plate holders x8
- Pegboard pins x12
- Dual cable connector
- Band pegs x4
- Tricep rope
- Close grip handle
- Olympic collars x2
- Extension chains x4
- Carabiners x8
- Ankle cuffs x2
- Load assist strap
- Barbell holder
- Spring collars x8
- Anchor brackets x4
■ Specifications
| Rack Size | W 195 × D 167 × H 223cm |
| Weight | 583kg |
| Load Capacity |
Rack: approx. 453kg Smith Machine: approx. 350kg Chin-up Bar: approx. 350kg |
| Cable |
6.2mm nylon-coated mil-spec aircraft quality cable 907kg (2000lbs) tested |
| Safety Bar Length |
Approx. 51cm |
| Upright Holes |
35 holes, approx. 5cm spacing |
| Left/Right Cable Height |
Approx. 8.5cm to approx. 229cm |
| Max. Left/Right Cable Width |
Approx. 197cm |
| Cable Angle Adjustment |
Vertical: 4 levels, Horizontal: 5 levels |
| Smith Machine Height |
Approx. 30cm to 194cm, 17 levels, 10cm spacing |
| Smith Machine Sleeve Length |
Approx. 32cm |
| Storage Weight Horn Length |
Approx. 19cm |
| Max. Depth with Sliding Bench Installed |
Approx. 266cm (Rack + Bench) ※When performing hack squats |
■ Precautions
This product is packaged in a wooden crate and is very heavy and large, so please be aware of this in advance when receiving delivery.
We can arrange for delivery and assembly/installation services for an additional fee, so please feel free to contact us. We will provide a separate estimate.
Bench, barbell, and plates are sold separately.
This product is handled as a build-to-order item, so delivery will take 2 to 3 months after your order.
Advance payment is required, so please select a payment method other than cash on delivery..
For delivery to Okinawa and remote islands, please consult us separately.
